FCC认证的概述|FCC认证三种方式

FCC ( Federal Communications Commission the United States Federal Communications Commission ) founded in 1934 by COMMUNICATIONACT, the United States government is an independent body, directly responsible to parliament. FCC control through radio, television, telecommunications, satellite and cable to coordinate domestic and international communication. To the United States more than 50 states, and the United States of America Columbia region, in order to ensure the life and property related to the radio and wire communications product safety, FCC Engineering Department ( Office of Engineering and Technology ) is responsible for the committee is also responsible for the technical support, equipment qualification affairs. Many of the radio application products, communication products and digital products to enter the American market, require the FCC recognition. FCC commission to investigate and study the various stages of product safety in order to find out the best way to solve the problem, at the same time, FCC also includes radio equipment, aircraft testing and so on. According to the United States Federal Regulations section (section CFR47 ) in regulation, where it enters the United States electronic products are required for Electromagnetic Compatibility Certification (number of articles relating to special provisions with the exception of products).
Electrical and electronic products sold in the United States to apply for FCC certification, and add FCC mark. FCC certification is about electromagnetic compatibility test and certification, the equivalent of EMC in EMI. The United States of America FCC for operating at frequencies above 9KHZ electronic products electromagnetic interference generated by both control. In order to promote more efficient use of spectrum resources, the United States Federal Communications Commission for radio frequency equipment established technical standards.
For most of the electrical and electronic products, mainly FCC Part15 and FCC Part18, communication terminal products for FCC Part68.
To obtain FCC certification, for different products have different three authentication mode, are: Verification, Declaration of Conformity ( DoC, Certification ). A different authentication mode, require testing laboratory to obtain FCC approval, and a different application, test and stated requirements.
Through standard FCC certification
FCC Verification self certification
As long as the gain of FCC accredited laboratories may give such reports. Mainly products include: AV products, corded telephone, ordinary household appliances, PC and PC peripheral equipment outside the digital equipment, CLASS A device.
Certification cycle: a week
Data preparation : application to FCC Verification manufacturers to provide samples, circuit diagram, a series of differences (if any ).
Shenzhen Tong Science and technology limited company can not only provide you with the recognition of the FCC test data, can also help you by FCC type test reports and certificates. SGS technology FCC authorization: http: / / www.tongbiao.com / Helps / TOBYtongbiaozhengshu.html
FCC DOC self declaration
Only access to the A2LA ( American Association for laboratory accreditation ) or NVLAP ( American National Laboratory Accreditation System ) accredited laboratory can issue such report and the DOC declaration. Manufacturers can in the superscript label FCC logo products, sold to the United States of america. Main products: IT, PC and PC peripheral equipment. Domestic customers generally do not apply to FCC DOC self proclaimed this pattern, because domestic laboratory does not have the qualifications, so the cycle last longer.
Certification cycle: 3-4 week
Data preparation : application to FCC DOC manufacturers to provide samples, circuit diagram, a series of differences (if any ).
FCC Certification ( FCC ID ) Certificate
Verification is a manufacturer to take certain steps to ensure that products meet the relevant technical standard process.
Declaration of Conformity by responsible party to take certain steps to ensure that products meet the relevant technical standard process.
FCC Certification is based on application and test data of signing device approval process.
Authentication method: a direct product will be sent to the United States, TCB laboratories, but in doing so will be higher costs, time is not good control. Two, product will be sent to the FCC accredited laboratory, laboratory testing, data preparation, to finish the report. The laboratory test report to the TCB body certification. Customers are mainly used in this way.